QUESTIONS?: CALL STACY @ 605-354-4545


Enter your phone number: (i.e.:6053525335)

     Redneck provides custom street rod kits and street rod parts with fiberglass bodies for Ford kit cars.
 


 
THE QUALITY OF OUR FIBERGLASS BODIES IS SECOND TO NONE!!
     We use aviation-quality raw materials created to withstand high heat and remain free of waves, blemishes, blisters or distortion.
 
    Our competitors often use general-purpose resins, which can result in many problems, particularly for dark colored vehicles. However, the Redneck body you buy today will be the same body you have 30 years from now, regardless of the color you choose.
 
     The strength of each body is enhanced by the type of resin we use and our main body molds are single molds.
 
    Unlike others that use multiple molds and then piece them together.
 
     Our bodies are such, that little or no adjusting is required and a minimal amount of body filler, if any, is needed and they come ready to paint.
"Where other company’s bodies take 2 to 3 gallons of Bondo to address the seams and surface issues, on a Redneck you might use a quart." Street Rods by Michael
 
    And we use the best quality hinges and handles for the doors and the trunk.

More of Our Quality Features:

  • Defroster ducts are installed in every dash.
  •  
  • Interior garnish moldings and doors have flat inner lips to attach window felts for a weather tight seal
  •  
  • Firewall design allows for additional room for A/C and fuse panel
  •  
  • Coupes have 6" more leg room due to package tray removal (why didn't the other guys think of this?!)
  •  
  • An unlimited options list - we build it the way you want it!
  •  
  • Free technical advice throughout the build of your rod
  •  
  • Pre-fitted interior upholstery panels available
  •  
  • When purchasing a body/chassis package, all fenders, running boards and aprons are fitted and installed free of charge
  •  
  • Your choice of dash smooth or stock (not currently available for the Cabster model)
  •  
  • Incredible fit of body panels and fender, which bolt on easily
  •  
  • Installed inside side door controls
  •  
  • Stainless steel hidden hinges on '33 and '34 models
  •  
  • Standard trick aluminum trunk hinges
  •  
  • An unlimited options list - we build it the way you want it!
  •  
  • Our bodies are ready and easy to finish

    The paints we use are top of the line and coated with a clear sealing coat. Three coats are applied with two coats of the sealer.
 
    The body, frame, doors, deck lid, hood and engine compartment components are fitted and then painted separatety. Our frames are powder coated to match your choice of color.
 
    We listen to you and paint with th e color of your choice. We also ship the cars and bodies paint ready for you to paint yourselves.
 
Johnson Hot Rod Shop
    “I am impressed with the Redneck body, you pay a little more but you get what you pay for. The quality fit of their product saves a lot of time and effort getting everything to come together. They are a top quality product.”
Alan Johnson



Street Rods by Michael

    “Redneck is the top-of-the-line in fiberglass bodies,they are the Cadillac of the industry. Where other company’s bodies take 2 to 3 gallons of Bondo to address the seams and surface issues, on a Redneck you might use a quart. A Redneck body is more solid; instead of 3 guys to pick up the body you need 5 to handle a Redneck. If you are looking for quality go with a Redneck.” Michael Young
 
Vintage Fabrications
    "Redneck has the best product we’ve seen. The quality and strength is far superior to that of other manufacturers. Their product is made with more material so it has less flex and is more substantial. The degree of reinforcement and floor thickness is outstanding. The interiors are excellent and easy to finish out. The design, such as integrating the seat belt bars into the body itself shows that Redneck doesn’t cut corners.” Bobby & Bruce Schumaker